Gypsnow

Gypsnow is a powdered gypsum plaster that expands with the addition of water.  Gypsnow is shaped by the utilization of molds and may also be carved or cut after being removed from the mold after a short drying period (about one hour.)  Gypsnow remains 'soft' after drying and is often used for special effect props requiring physical impact. Sold in 50lb bags

Properties:

• Ultra-lightweight.
• Ultra soft.
• Easily Breakable.
• Molds to most shapes.
• Super expansive. Reaches 50% of the initial height in less than 30 minutes.
• Super reactive. Begins to expand in seconds.
• Ready for carving in 1 hour.
• It can be easily colored. Contact Western Blended Products for instructions.
• Unique in the market.
• Ready to use just add water.

Mixing: 

1. Due to the expansion of Gypsnow, the maximum recommended mix for any pour is 5 gallons.  
2. Add 1.4 gallons (5.4 L) of water into a 5 gallon clean pail. For better results, water temperature should be 70°F.
3. Add 14 1/4 Lbs (6.5 kg) of Gypsnow into the pail containing the water.
4. Stir with an electrical drill for 8 seconds at 1/2 to 2/3 power
5. Pour the mixture rapidly into a plastic lined form at approximately at 2/3 from the top of the plastic form.
6. Remove solid mixture from the form / mold after 1 hour.
7. Contact Western Blended Products for information regarding Gypsnow variations. Do not add any other additives without contacting Western Blended Products for approval. 

Drying / Curing:
Gypsnow must stay in the mold for 45 minutes to an hour before the product may be removed. Carving and painting may take place when the product is removed from the mold and has properly dried.

​

Storage:
Gypsnow shall be kept indoors or if stored outdoors, shall be adequately covered to keep dry and be stored off the ground.

RESOURCES:
Product Safety Data Sheet (PDF)